LIQUID CRYTAL HR2
New, upgraded HR2 with improve drive unit, pre – homed platform, flex plate and new Photocentric Studio.
An upgraded, maintanence free drive unit features in the Liquid Crytal HR2. The unitenable increasd accuracy over the height of the printer offering increased reliability to print both large solid parts and small in tricate detail
Technical data
Technology
Daylight polymer printing
LCD specification
9.7″ (2048×1536 px)
Connectivity
USB, Wireless, Ethernet
Printer control
Interactive 7″ Touch-screen
Resin Fill system
Manual
Build Volume
196 x 147 x 250 mm
7.7 x 5.8 x 9.8 in
Layer Thickness
50, 100 microns
0.002, 0.004 inches
XY pixel density
97 microns
Cure speed at 100 micron
25-55 sec/layer (depending on resin)
Dimensions
38 × 35 × 59 cm
15 × 13.7 × 23 in
(W) x (D) x (H)
Weight
15 Kg (33 Lbs)
Power requirements
100–240 V, UK/USA/EU plug
LIQUID CRYTAL HR2
Produce large hight resolution object at a fraction of the cost of orther 3D PRINTERS. Build volume 470 x 240 x 340 mm.
Liquid Crytal display
LCD specification 3840 x 2160 mm. Intergral to the printer is the unmodified Ultra High Definition LCD panel used to cure the resin.Whilst the XY pixel size of 137 microns gives accuracy and fine detail, the hight brightness and hight contrast also contributes to building faithful representations of your 3 D models.
Technical data
Technology
Daylight polymer printing
LCD specification
23.8″ (3840×2160 px)
Connectivity
USB, Display Port
Printer control
Via PC
Resin Fill system
Manual
Build Volume
470 x 240 x 340 mm
18.5 x 9.4 x 13.4 in
Layer Thickness
50, 100 microns
0.002, 0.004 inches
XY pixel density
137 microns
Cure speed at 100 micron
50-100 sec/layer (depending on resin)
Dimensions
82 × 49 x 74 cm
33 × 20 x 29 in
(W) x (D) x (H)
Weight
66 Kg (145 Lbs)
Power requirements
100–240 V, UK/USA/EU plug
