HIGHT-TEMPERATURECOMPACT ROTATING BURNOUT FURNACE (RBF-S)
◆Touch Pane
◆Characteristics
■ Minimization of Uneven Burning of Molds
Uniform temperature distribution inside therotary electric furnace minimizes uneven burning of the molds.Furthermore, it is not necessary tochange the position of the molds during burning.
■ Minimization of Pollution and Odor Caused by Smoke
The afterburner witha unique burning system re-burns smoke inside the furnace, thus minimizingpollution and odor caused by smoke.
■ Maximum Burning Temperature：950℃
This maximum burning temperature is optimum for casting of gold, silverand platinum.
■ Compact Size
The unit is also suitable for multi-product and small lotproduction. In spite of its compactness, the unit can store up to 13molds that are 101 mm in diameter.
■ Overheat Prevention Device
If the settemperature is exceeded, the power is automatically turned off.
Technicaldata
|
Power supply |
AC 220 V±10%, single phase |
|
Power consumption |
6 KVA |
|
Temperature setting range |
0℃～950℃ |
|
Temperature display range |
0℃～1200℃ |
|
Temperature display resolution |
1℃ |
|
Furnace temperature |
set temperature ±2℃ |
|
Afterburner |
The afterburner is turned on simultaneously with |
|
Temperature display |
±5℃ at 0～1,000℃ |
|
position of rotary tables |
position 1～18 |
|
Operation steps |
Sheet panel : 4 steps (Step1～4) or 8steps |
|
Number of memories |
Sheet panel : 4 (M1～4) |
|
Setting of step start time |
It is possible to set the start time up to |
|
Power failure detection time |
5 minutes or longer (A power failure for |
|
Maximum height of mold (flask) |
230ｍｍ |
|
Number of molds |
Ø100－13, Ø89－15, Ø76－19 |
|
External dimension |
825 (W)×708(D)×1,984 (H) mm |
|
Weight of main body |
About 200Kg |
LARGE-SIZE ROTATINGBURNOUT FURNACE （RBF-L）
◆TouchPanel
◆Characteristics
■ Minimization of UnevenBurning of Molds
Uniformtemperature distribution inside the rotary electric furnace minimizesuneven burning of themolds.Furthermore, it is not necessary to change the position of the moldsduring burning.
■ Minimization of Pollution and Odor Caused by Smok
The afterburner with a unique burning system re-burnssmoke inside the furnace, thus minimizing pollution and odor caused bysmoke.
■ Burning of a Large Volumeof Plaster Molds
Maximum storage capacity：
H：250mm×Ø130 － 21 flasks
H：230mm×Ø100 － 37 flasks
H：230mm×Ø89 － 45 flasks
■ Overheat Prevention Device
If the set temperature is exceeded, the power isautomatically turned off.
Technical data
|
Power supply |
AC380V±10％（17.2KVA）50/60Hz |
|
Power consumption |
Main heater：11KVA（200V）/13.3KVA（380V） |
|
Afterburner (AB)：3.1KVA（200V）/3.7KVA（380V） |
|
|
Temperature setting range |
0-850℃ (maximum operating temperature) |
|
32～1,562°F (maximum operating temperature) |
|
|
Temperature display range |
0℃～1200℃ /（32°F~2192°F） |
|
Minimum temperature display unit |
1℃ /（2°F） |
|
Furnace temperature control accuracy |
Set temperature ±2℃ |
|
Afterburner (AB) |
600±3℃ (under stable condition) |
|
Temperature sensor display accuracy |
±10℃ at 0～1,000℃ |
|
Indication of rotational position |
1 ～ 48 |
|
Operation steps |
Sheet panel : 4 or 8steps（Step1～8） |
|
Number of memories |
Sheet panel : 10 (Memories 0～9) |
|
Setting of time |
0～9 days, 23 hours and 59 minutes |
|
Power failure detection time |
No power supply for 5 minutes or more is |
|
|
considered to be a power failure. |
|
Maximum permissible height of flask |
250mm |
|
Number of flasks that can be set up |
H：250mm×Ø130 － 21 flasks |
|
Weight |
460Kg |
